ماژول RFM12B-434DPفرکانس 434MKZ

این گیرنده فرستنده در یک پکیج و با قیمت بسیار مناسبی ارائه شده است که به واسطه ارتباط سریال قابلیت اتصال به میکروکنترلر و ... را دارا می باشد . در مورد روش های راه اندازی و برنامه نویسی این گیرنده - فرستنده در انجمن های سایت بحث شده است که برای اطلاعات بیشتر می توانید به آنها مراجعه کنید . مشخصات این گیرنده وسیله به صورت زیر می باشد :

DESCRIPTION

Hope's RF12B is a single chip, low power, multi-channel FSK transceiver designed for use in applications requiring FCC or ETSI conformance for unlicensed use in the 433, 868 and 915 MHz bands. The RF12B transceiver produces a flexible, low cost, and highly integrated solution that does not require production alignments. The chip is a complete analog RF and baseband transceiver including a multi-band PLL synthesizer with PA, LNA, I/Q down converter mixers, baseband filters and amplifiers, and an I/Q demodulator. All required RF functions are integrated. Only an external crystal and bypass filtering are needed for operation.

The RF12B features a completely integrated PLL for easy RF design, and its rapid settling time allows for fast frequency-hopping, bypassing multi-path fading and interference to achieve robust wireless links. The PLL??s high resolution allows the usage of multiple channels in any of the bands. The receiver baseband bandwidth (BW) is programmable to accommodate various deviation, data rate and crystal tolerance requirements. The transceiver employs the Zero-IF approach with I/Q demodulation. Consequently, no external components (except crystal and decoupling) are needed in most applications. The RF12B dramatically reduces the load on the microcontroller with the integrated digital data processing features: data filtering, clock recovery, data pattern recognition, integrated FIFO and TX data register. The automatic frequency control (AFC) feature allows the use of a low accuracy (low cost) crystal. To minimize the system cost, the RF12B can provide a clock signal for the microcontroller, avoiding the need for two crystals.

For low power applications, the RF12B supports low duty cycle operation based on the internal wake-up timer.

Features

Fully integrated (low BOM, easy design-in)

No alignment required in production

Fast-settling, programmable, high-resolution PLL synthesizer

Fast frequency-hopping capability

High bit rate (up to 115.2 kbps in digital mode)

Direct differential antenna input/output

Integrated power amplifier

Programmable TX frequency deviation (15 to 240 kHz)

Programmable RX baseband bandwidth (67 to 400 kHz)

Analog and digital RSSI outputs

Automatic frequency control (AFC)

Data quality detection (DQD)

Internal data filtering and clock recovery

RX synchron pattern recognition

SPI compatible serial control interface

Clock and reset signals for microcontroller

16 bit RX Data FIFO

Two 8 bit TX data registers

Low power duty cycle mode

Standard 10 MHz crystal reference

Wake-up timer

2.2 to 3.8 V supply voltage

Low power consumption

Low standby current (0.3µA)

Supports very short packets (down to 3 bytes)

Excellent temperature stability of the RF parameters